382 Packages containing toy plastic or paper caps for toy pistols described as UN0349, Articles, explosive, n.o.s. (5) N codes. You can learn more about the process There must be no hazardous effects outside the package such as disruption of the package, metal fragments or a receptacle which passes through the packaging. The total weight of the explosive contents of the shaped charges assembled in the guns does not exceed 90.5 kg (200 pounds) per vehicle; and. The portable tank must not be used if the wall thickness is less than that prescribed by the applicable T code in Column (7) of the Table for this material. The only tank car tanks authorized are Class DOT 105 tank cars having a test pressure of 2,069 kPa (300 psig) or greater. A14 This material is not authorized to be transported as a limited quantity or consumer commodity in accordance with 173.306 of this subchapter when transported aboard an aircraft. A60 Sterilization devices, when containing less than 30 mL per inner packaging with not more than 150 mL per outer packaging, may be transported in accordance with the provisions in 173.4a, irrespective of 173.4a(b), provided such packagings were first subjected to comparative fire testing. 134 This entry applies only to vehicles powered by wet batteries, sodium batteries, lithium metal batteries or lithium ion batteries, and equipment powered by wet batteries or sodium batteries that are transported with these batteries installed. Tables 1, 2, and 3 follow: 1 Flexible plastic (51H) Large Packagings are only authorized for use with flexible inner packagings. When no IB code is assigned in the 172.101 Table for a specific proper shipping name, or in 173.185 or 173.225(e) Organic Peroxide Table for Type F organic peroxides, use of an IBC or Large Packaging for the material may be authorized when approved by the Associate Administrator. c. The completed package must meet the Packing Group II performance level, as applicable for combination packagings with a plastic box outer packaging, in accordance with subpart M of part 178 of this subchapter. 102 The ends of the detonating cord must be tied fast so that the explosive cannot escape. B15 Packagings must be protected with non-metallic linings impervious to the lading or have a suitable corrosion allowance. The rechargeable lithium ion cells can only be charged from the primary lithium metal cells; ii. Transportation of these packages also requires the door of each van trailer to be marked with Warning trailer may contain chemical vapor. Each tank car must have a reclosing pressure relief device having a start-to-discharge pressure of 15.51 Bar (225 psig). switch to drafting.ecfr.gov. W41 When offered for transportation by water, this material must be packaged in bales and be securely and tightly bound with rope, wire or similar means. 368 In the case of non-fissile or fissile-excepted uranium hexafluoride, the material must be classified under UN3507 or UN2978. No label is needed where the table shows the word NONE. Air must be eliminated from the vapor space by nitrogen or other means. 49 CFR 172.101 64 The group of alkali metals includes lithium, sodium, potassium, rubidium, and caesium. Cargo heaters must be reverse refrigeration (heat pump) units. (c) Tables of special provisions. These provisions apply only to transportation by water: W1 This substance in a non friable prill or granule form is not subject to the requirements of this subchapter when tested in accordance with the UN Manual of Test and Criteria (IBR, see 171.7 of this subchapter) and is found to not meet the definition or criteria for inclusion in Division 5.1. 1/1.1 365 For manufactured instruments and articles containing mercury, see UN3506. The article, machinery, or apparatus, if unpackaged, or the packaging in which it is contained shall be marked Dangerous goods in articles or Dangerous goods in machinery or Dangerous goods in apparatus as appropriate, with the identification number UN3363. 352 Ammonium chlorite, ammonium chlorite aqueous solutions, and mixtures of a chlorite with an ammonium salt are forbidden for transport. For the purpose of this special provision, vehicles are self-propelled apparatus designed to carry one or more persons or goods. 132 This description may only be used for ammonium nitrate-based compound fertilizers. c. Completed neutron radiation detection systems containing detectors meeting the conditions of paragraph a of this special provision must be transported as follows: (1) The detectors must be contained in a strong sealed outer casing; (2) The casing must contain include sufficient absorbent or adsorbent material to absorb or adsorb the entire gas contents; (3) The completed system must be packed in strong outer packagings capable of withstanding a 1.8 meter (5.9 feet) drop test without leakage unless a system's outer casing affords equivalent protection. Outage must be sufficient to prevent tanks from becoming liquid full at 55 C (130 F). B70 If DOT 103ANW tank car tank is used: All cast metal in contact with the lading must have 96.7 percent nickel content; and the lading must be anhydrous and free from any impurities. The batteries inside the cargo transport unit are not subject to marking or labelling requirements of part 172 subparts D and E of this subchapter. Table 2 defines IP Codes on the use of IBCs that are assigned to specific commodities in the 172.101 Table of this subchapter. Transportation by vessel in IBCs is prohibited. (3) The total amount of gas from all detectors per outer packaging must not exceed 52 grams (1.83 ounces). 34 The commercial grade of calcium nitrate fertilizer, when consisting mainly of a double salt (calcium nitrate and ammonium nitrate) containing not more than 10 percent ammonium nitrate and at least 12 percent water of crystallization, is not subject to the requirements of this subchapter. It is shown that it does not pose a significant risk in transportation; b. Regulation Y Net weight of contents in fiberboard boxes may not exceed 29 kg (64 pounds). The Table: provides the proper shipping name or directs the user to the preferred proper shipping name; Components classed as Division 6.1, Packing Group I, or Class 8, Packing Group I, must not be offered for transportation and transported under this description. If unlined tanks are washed out with water, they must be repassivated prior to return to service. However this examination is required when the conditions of 180.605(f) are met. A34 Aerosols containing a corrosive liquid in Packing Group II charged with a gas are not permitted for transportation by aircraft. (2) They must be packed in strong outer packagings and the completed package must be capable of withstanding a 1.8 meter (5.9 feet) drop without leakage of gas contents from detectors. 160 This entry applies to safety devices for vehicles, vessels or aircraft, e.g. Table 1. N34 Aluminum construction materials are not authorized for any part of a packaging which is normally in contact with the hazardous material. (2) An indication of compliance with this special provision must be provided by marking each package with the words not restricted or by including the words not restricted on a transport document such as an air waybill accompanying the shipment. If the material has a flash point of less than 38 C (100 F), then the bulk packaging requirements of 173.242 of this subchapter are applicable. d. In addition to the training requirements prescribed in 172.700 through 172.704, each driver must be trained regarding the properties and hazards of diatomaceous earth filter material, precautions to ensure safe transport of the material, and actions to be taken in the event of an emergency during transportation, or a substantial delay in transit. Except when the liquids are fully absorbed in solid material contained in sealed bags, for single packagings, each packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II level. shipping name in Column (1) of the 172.101 Table, it means that the mate-rial is known to pose a risk to humans. Background and more details are available in the Dry batteries not specifically covered by another entry in the 172.101 Table are covered by this entry (i.e., Batteries, dry, sealed, n.o.s.) In this case, some parts of the vehicle may be detached from its frame to fit into the packaging. Comments or questions about document content can not be answered by OFR staff. A lighter refill exceeding 4 fluid ounces capacity (7.22 cubic inches) or containing more than 65 grams of fuel must be classed as a Division 2.1 material, described with the proper shipping name appropriate for the material, and packaged in the packaging specified in part 173 of this subchapter for the flammable gas contained therein. N6 Battery fluid packaged with electric storage batteries, wet or dry, must conform to the packaging provisions of 173.159 (g) or (h) of this subchapter. Shipments must be made by private, leased or contract carrier vehicles under exclusive use of the offeror. Except for transportation by aircraft, as an inner packaging of a combination packaging with a maximum net mass of 40 kg (88 pounds). Nickel-carbon asymmetric capacitors containing Class 8 alkaline electrolytes must be transported as UN2795, Batteries, wet, filled with alkali, electric storage. c. The cylinders are collected and transported by a private or a contract carrier for reconditioning, reuse or disposal. Energy storage capacity means the energy stored in a capacitor, as calculated according to the following equation. The manufacturer must apply procedures to ensure that articles produced in series are made of good quality, conform to the design type and are able to meet the requirements in (a). These special provisions are in addition to the standard packaging requirements. B30 MC 312, MC 330, MC 331 and DOT 412 cargo tanks and DOT 51 portable tanks must be made of stainless steel, except that steel other than stainless steel may be used in accordance with the provisions of 173.24b(b) of this subchapter. A9 For combination packagings, if plastic bags are used, they must be packed in tightly closed metal receptacles before packing in outer packagings. TP7 The vapor space must be purged of air by nitrogen or other means. Nickel-metal hydride button cells or nickel-metal hydride cells or batteries packed with or contained in battery-powered devices transported by vessel are not subject to the requirements of this special provision. Metal: 11A, 11B, 11N, 21A, 21B and 21N, b. c. The time between offering the material for transportation at the point of origin, and unloading the material at the destination does not exceed 48 hours. 198 Nitrocellulose solutions containing not more than 20% nitrocellulose may be transported as paint, perfumery products, or printing ink, as applicable, provided the nitrocellulose contains no more 12.6% nitrogen (by dry mass). contact the publishing agency. This particularly applies to corrosivity, permeability, softening, premature aging and embrittlement. Where different hazardous materials in limited quantities are packed together in the same outer packaging, when a gross mass is indicated Column 4 of 173.27 Table 3, the net quantity of each hazardous material must be shown in addition to the gross mass of the completed package. A combination packaging consisting of a 4G fiberboard box with inner receptacles of glass or earthenware; b. (h) Column 7: Special provisions. (i) These provisions apply to the transportation of hazardous materials in IM and UN Specification portable tanks. Specification IBCs and FIBCs are to be secured to a pallet. (TOY CAPS) - HANDLE CAREFULLY OR TOY CAPS - HANDLE CAREFULLY; and. B5 Only ammonium nitrate solutions with 35 percent or less water that will remain completely in solution under all conditions of transport at a maximum lading temperature of 116 C (240 F) are authorized for transport in the following bulk packagings: MC 307, MC 312, DOT 407 and DOT 412 cargo tanks with at least 172 kPa (25 psig) design pressure. 440 When this material is transported by tank car, the offeror must ensure each tank car is remotely monitored for pressure and location. Packaging must be UN standard metal drums attached with heavy duty steel strapping to a pallet; and. b. The quantities of hazardous materials do not exceed those specified in 173.4a of this subchapter; and. The organic peroxide must be type D, E, or F, not requiring temperature control. a. 430 This entry shall only be used for solid medical waste of Category A transported for disposal. 70 Black powder that has been classed in accordance with the requirements of 173.56 of this subchapter may be reclassed and offered for domestic transportation as a Division 4.1 material if it is offered for transportation and transported in accordance with the limitations and packaging requirements of 173.170 of this subchapter. Kits that are carried on board transport vehicles for first aid or operating purposes are not subject to the requirements of this subchapter. 114 Jet perforating guns, charged, oil well, without detonator may be reclassed to Division 1.4 Compatibility Group D (1.4D) if the following conditions are met: a. Hazardous materials necessary for the safe and proper operation of the cargo transport unit (e.g., fire extinguishing systems and air conditioning systems), must be properly secured to or installed in the cargo transport unit and are not otherwise subject to this subchapter. in Column (7) of the 172.101 Hazardous Materials Table for a specific haz-ardous material; and marine portable tanks conforming to 46 CFR part 64 are authorized. B134 For Large Packagings offered for transport by vessel, flexible or fibre inner packagings shall be sift-proof and water-resistant or shall be fitted with a sift-proof and water-resistant liner. When such batteries are transported in accordance with 173.185(c), the total lithium content of all lithium metal cells contained in the battery must not exceed 1.5 g and the total capacity of all lithium ion cells contained in the battery must not exceed 10 Wh. 119 This substance, when in quantities of not more than 11.5 kg (25.3 pounds), with not less than 10 percent water, by mass, also may be classed as Division 4.1, provided a negative test result is obtained when tested in accordance with test series 6(c) of the UN Manual of Tests and Criteria (IBR, see 171.7 of this subchapter). 37 Unless it can be demonstrated by testing that the sensitivity of the substance in its frozen state is no greater than in its liquid state, the substance must remain liquid during normal transport conditions. e. When offered for transport in an ammonia dispenser, the receptacles shall be connected to the dispenser in such a way that the assembly is guaranteed to have the same strength as a single receptacle. c. A composite packaging 6PG2 (glass, porcelain or stoneware receptacles within a fiberboard box). Based on the volatility class determined by using ASTM D 439 and the Reid vapor pressure (RVP) of the particular gasoline, the maximum lading pressure and maximum ambient temperature permitted during the loading of gasoline may not exceed that listed in Table I. The packing group assignment and packaging must be approved by the Associate Administrator for Hazardous Materials Safety on the basis of the criteria in 173.21 of this subchapter and the package type used for the Series 6(c) test. 109 Rocket motors must be nonpropulsive in transportation unless approved in accordance with 173.56 of this subchapter. For UN identification numbers 1327, 1363, 1364, 1365, 1386, 1408, 1841, 2211, 2217, 2793 and 3314, IBCs are not required to meet the IBC performance tests specified in part 178, subpart N, of this subchapter. Thickness of stainless steel for tank shell and heads for cargo tanks and portable tanks must be the greater of 6.35 mm (0.250 inch) or the thickness required for a tank with a design pressure at least equal to 1.3 times the vapor pressure of the lading at 46 C (115 F). An installed inflation cylinder that requires recharging must be filled in accordance with 173.301(l). 41 This material at the Packing Group II hazard criteria level may be transported in Large Packagings. They must be classified in accordance with the procedure as set out in the Manual of Tests and Criteria, part III, section 39 (IBR, see 171.7 of this subchapter). See Batteries, dry, sealed, n.o.s. in the 172.101 Hazardous Materials Table (HMT) of this part for transportation requirements for nickel-metal hydride batteries transported by other modes and for nickel-metal hydride button cells or nickel-metal hydride cells or batteries packed with or contained in battery-powered devices transported by vessel. Outage must be at least 5 percent at 98 C (208 F). (6) A code containing the letter R refers to a special provision which applies only to transportation by rail. meet the venting requirements in 173.24(g) or (2.) 137 Cotton, dry; flax, dry; sisal, dry; and tampico fiber, dry are not subject to the requirements of this subchapter when they are baled in accordance with ISO 8115, Cotton Bales - Dimensions and Density (IBR, see 171.7 of this subchapter) to a density of not less than 360 kg/m3 (22.1 lb/ft3) for cotton, 400 kg/m3 (24.97 lb/ft3) for flax, 620 kg/m3 (38.71 lb/ft3) for sisal and 360 kg/m3 (22.1 lb/ft3) for tampico fiber and transported in a freight container or closed transport vehicle. There you have it! 441 For marine pollutants transported under UN3077, Environmentally hazardous substance, solid, n.o.s. or UN3082, Environmentally hazardous substance, liquid, n.o.s. and for purposes of shipping paper and package marking requirements, the technical name used in association with the basic description may be a proper shipping name listed in the 172.101 Hazardous Material Table; provided that the name chosen is not also an entry that includes n.o.s. as a part of the name or one that has a G in column (1) of the table.